Farm Tractor Parts & Equipment

Fairbanks Morse Z Engine

Are you looking for Farm Tractor online? Trying to find Fairbanks Morse Z Engine or relevant listings? We catalog a considerable assortment of Fairbanks Morse Z Engine, displaying items such as Massey Ferguson, Farm Tractor, Garden Tractor, Farm Machine, and much more. Shop our big collection, or try doing a search for a specific Farm Tractor using the search. Our site has access to hundreds of thousands of listings from online retailers, so our site just might have what you are searching for! Buy Fairbanks Morse Z Engine today!

1919 1-12hp Fm Crank Guard Fairbanks Morse Z Old Gas Engine

1919 1-12hp

1919 1-12hp Fm Crank Guard Fairbanks Morse Z Old Gas Engine For Sale Online

Here Is A Crank Guard For A 1919 1-12hp Fairbanks Morse Z Gas Engine. This Is For The Engine With The Flat Steel Push Rod And The Sumter Mag Setup On The Side Of The Head That Was Made Only In 1919.


$114.95

Early Fairbanks Morse Z Plug Oscillator Hit Miss Gas Engine Splash Guard Rare

Early Fairbanks

Early Fairbanks Morse Z Plug Oscillator Hit Miss Gas Engine Splash Guard Rare For Sale Online

This Is A Nice Original "crank Guard" Or "splash Guard" For The Fairbanks Morse Gasoline Engines. I Think This Is For The Early Plug Oscillator 1-12 Hp Fairbanks Engines. Be Best For An Engine That Needs A Painted Guard, Other Wise It's Ready To Use Or Display With Your Engine. Don't Miss Out On Your Chance To Pick Up A Nice Original Crank Guard For Your Fairbanks Morse Gas Engine.


$149.99

Old Fairbanks Morse Headless Z Fuel Mixer Intake Valve Cage Hit Miss Gas Engine

Old Fairbanks

Old Fairbanks Morse Headless Z Fuel Mixer Intake Valve Cage Hit Miss Gas Engine For Sale Online

This Is An Original Fuel Mixer And Intake Valve Assembly For A Headless Fairbanks Morse Z Hit And Miss Gas Engine. It Is In Good Used Condition With No Cracks, Breaks, Or Repairs And The Fuel Needle Moves As It Should.


$135.95

Crankguard 3hp Fairbanks Morse Z Hit Miss Gas Engine Crank Guard

Crankguard 3hp

Crankguard 3hp Fairbanks Morse Z Hit Miss Gas Engine Crank Guard For Sale Online

Crankguard 3hp Fairbanks Morse Z Hit Miss Gas Engine Crank Guard. This Is The Version For Magneto Engine. Has Factory Cut-out For Magneto. Minor Surface Rust But Zero Dents.


$125.00

New 15 Hp Fairbanks Morse Model Z Intake Valve Gas Engine Motor

New 15

New 15 Hp Fairbanks Morse Model Z Intake Valve Gas Engine Motor For Sale Online



$104.07

Crank Guard For A 1-12hp To 2hp Fairbanks Morse Z Hit Miss Gas Engine Patina

Crank Guard

Crank Guard For A 1-12hp To 2hp Fairbanks Morse Z Hit Miss Gas Engine Patina For Sale Online

For Your Consideration Is An Original Crank Guard For A 1-12hp To 2hp Fairbanks Morse Z Hit And Miss Stationary Gas Engine. It Is In Great Shape And Ready To Use. Check Out The Pictures And See If You Need It.


$155.00

Sumter 14 Fairbanks Morse Headless Z Hit Miss Gas Engine Magneto Rebuilt Nice

Sumter 14

Sumter 14 Fairbanks Morse Headless Z Hit Miss Gas Engine Magneto Rebuilt Nice For Sale Online

Very Hard To Find Sumter No.14 Rotary Magneto As Used On The Headless Fairbanks Morse Z Engines And A Few Others. Magneto Is In Excellent Rebuilt Condition And Has No Wear In The Bearings As It Has Been Bushed.


$375.95

Connecting Rod Cap For Large Fairbanks Morse Z Gas Engine 10hp Or Larger

Connecting Rod

Connecting Rod Cap For Large Fairbanks Morse Z Gas Engine 10hp Or Larger For Sale Online

Here Is An Original Connecting Rod Cap For A Large Fairbanks Morse Z. I Am Not Sure What Size Its For But I Am Sure It Is 10hp Or Bigger. Seems To Be In Great Shape. Check Out The Pictures And See If You Need It.


$149.95

Carburetor Or Fuel Mixer For 6hp Igniter Style Fairbanks Morse Z Fm Engine

Carburetor Or

Carburetor Or Fuel Mixer For 6hp Igniter Style Fairbanks Morse Z Fm Engine For Sale Online

Here Is An Original Carb With Built In Fuel Pump For A 6hp Fairbanks Morse Z Igniter Style Gas Engine. It Looks To Be In Good Shape. It Is Missing A Small Brass Tube That Should Extend A Little Bit Into The Head Of The Engine, I Think It Would Be Super Easy To Replace That Tube Or It May Work Fine Without It.


$299.95

Nice 3 Hp Z Fairbanks Morse Hit Miss Gas Engine Crank Splash Guard Rare

Nice 3

Nice 3 Hp Z Fairbanks Morse Hit Miss Gas Engine Crank Splash Guard Rare For Sale Online

This Is A Nice Original "crank Guard" Or "splash Guard" For The Fairbanks Morse Gasoline Engines. This Is For The 3 Hp "z" Engines. It's Ready To Use On Or Display With Your Engine. Don't Miss Out On Your Chance To Pick Up A Super Nice Original Crank Guard For Your 3 Hp Fairbanks Morse Gas Engine.


$219.99

3hp Fairbanks Morse Z Hit Miss Engine Cylinder Head Wvalves Magneto Oiler Nice

3hp Fairbanks

3hp Fairbanks Morse Z Hit Miss Engine Cylinder Head Wvalves Magneto Oiler Nice For Sale Online

This Is An Original Cylinder Head With Valves For A 3hp Fairbanks Morse Z Gas Engine. It Mounts With Four Holes On A 4 14" Square Pattern And Is Correct For The Spark Plug Fired 3hp Engines. It Is In Good Condition With No Cracks, Breaks, Or Repairs That I Can See Or Know Of.


$325.95

Fairbanks Morse Model Z Headless Exposed Crank 1 12 Hp Stationary Hit Miss

Fairbanks Morse

Fairbanks Morse Model Z Headless Exposed Crank 1 12 Hp Stationary Hit Miss For Sale Online

Beautiful Engine. Very Early Not Sure If I Am Seeing This Right But The Serial Number Looks Like 44,455. Guard Took Off For Better Pictures. As Found, Wiped Off Oil Residue With Rags, All Original.


$2750.00

Early Fairbanks Morse Z Hit Miss Gas Engine Sumter Oscillator Magneto Igniter

Early Fairbanks

Early Fairbanks Morse Z Hit Miss Gas Engine Sumter Oscillator Magneto Igniter For Sale Online

This Is An Igniter For The Earlier Fairbanks Morse Gasoline Engines. This Works On The 1 12 3 & 6 Hp Engines.


$189.99

6 Flat Belt Pulley For 1-12hp Headless Fairbanks Morse Hit Miss Engine Fm Z

6 Flat

6 Flat Belt Pulley For 1-12hp Headless Fairbanks Morse Hit Miss Engine Fm Z For Sale Online

Here Is A Very Nice Cast Iron Pulley For A 1-12hp Headless Fairbanks Morse Hit And Miss Engine. It's Just A Little Rusty But Should Clean Up Nicely. Check Out The Pictures And See If You Need It. For A 1-12hp Fm Headless, Will Probably Fit Other Fm Engines.


$139.95

Rebuilt Case 6 Cylinder 500e 930 940 Tractor 377 Engine Magneto Fairbanks Morse

Rebuilt Case

Rebuilt Case 6 Cylinder 500e 930 940 Tractor 377 Engine Magneto Fairbanks Morse For Sale Online

Fairbanks Morse Model (z6b9 . Fits Case 377ci Engines, 500e, 940 Tractors. Hot Spark. Never Installed. Wide Add Mounting Plate 3.75". Mounting Plate Whole Center 4.75'. Height 6.5". ).


$189.00

Fairbanks Morse Model Z Style D 2 Hp Stationary Hit Miss Engine 1920s

Fairbanks Morse

Fairbanks Morse Model Z Style D 2 Hp Stationary Hit Miss Engine 1920s For Sale Online

Item Is Being Sold As Is For Parts Repair Or Restoration. Engine Has Good Compression, Fm Magneto Is Hot.


$805.50

Fairbanks Morse Z 6hp Rocker Arm Stand Hit Miss Stationary Engine Repaired

Fairbanks Morse

Fairbanks Morse Z 6hp Rocker Arm Stand Hit Miss Stationary Engine Repaired For Sale Online

For Your Consideration Is An Original Fairbanks Morse Z 6hp Rocker Arm & Stand, With A Head Stud And Crown But Included. The Rocker Is About 6-14 Overall Length. It Is Painted Green.


$125.00

6hp Fairbanks Morse Z Gas Engine Sumter Plugoscillator Steam Tractor Original

6hp Fairbanks

6hp Fairbanks Morse Z Gas Engine Sumter Plugoscillator Steam Tractor Original For Sale Online

6hp Fairbanks Morse Z Throttle Governed, Open Crank, Flywheel Type Engine. It Is The Early Style With One-piece Hopper. Engine Is In Good Condition With No Cracks, Breaks, Or Repairs That I Can See Or Know Of But It Is Stuck.


$795.95

Carburetor W Fuel Pump 3 Hp Fairbanks Morse Z Throttle Gov Engine Hit Miss Gas

Carburetor W

Carburetor W Fuel Pump 3 Hp Fairbanks Morse Z Throttle Gov Engine Hit Miss Gas For Sale Online

3 Hp Fairbanks Morse Z Throttle Governed Engine. Fits 3 Hp Fairbanks Morse Throttle Governed Engine. Carburetor With Built-in Fuel Pump For. I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable.


$399.99

Igniter For 1 12hp Headless Fairbanks Morse Z Hit Miss Gas Engine Fm

Igniter For

Igniter For 1 12hp Headless Fairbanks Morse Z Hit Miss Gas Engine Fm For Sale Online

Igniter 1 12hp Headless Fairbanks Morse Z. I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable. I Apologize For Any Inconvenience. Mounts 2 58" Center To Center. If You Decide You Don't Want It Or Find Another One Cheaper, I Won't Take It Back.


$249.99

3hp Fairbanks Morse Z Steel Crankguard Hit Miss Gas Engine Steam Tractor Oiler

3hp Fairbanks

3hp Fairbanks Morse Z Steel Crankguard Hit Miss Gas Engine Steam Tractor Oiler For Sale Online

This Is A Very Hard To Find Original Steel Crankguard Or Fender For A 3hp Fairbanks Morse Z Flywheel Type Gas Engine. It Is In Excellent Condition With No Cracks, Breaks, Or Repairs Of Any Kind As Can Be Seen.


$185.95

Hercules 6 Cylinder Gas Engine Tractor Rebuilt Magneto Fairbanks Morse Z6a14

Hercules 6

Hercules 6 Cylinder Gas Engine Tractor Rebuilt Magneto Fairbanks Morse Z6a14 For Sale Online

Hot Refurbished Magneto. Fairbanks Morse Model Z6a14. Fits Several Hercules 6 Cylinder Gas Engines. Hot Spark. Refurbished With Many New Parts. Tested On A Graham Lee Tester. Replaces The F6 Magneto.


$199.00

303k161 Webster Magneto Igniter Bracket For Goold Or Fairbanks Morse Z Engine

303k161 Webster

303k161 Webster Magneto Igniter Bracket For Goold Or Fairbanks Morse Z Engine For Sale Online

Here Is A Webster Igniter Bracket For Goold Engine. It Is In Pretty Good Shape. I Am Pretty Sure This Will Also Fit A Fairbanks Morse Z Engine That Would Take A Plug Igniter. Check Out The Pictures And See If You Need It.


$249.95

Governor Assembly For 3hp Or 6hp Fairbanks Morse Z Igniter Style Engine Old Fm

Governor Assembly

Governor Assembly For 3hp Or 6hp Fairbanks Morse Z Igniter Style Engine Old Fm For Sale Online

Here Is A Very Nice Governor Assembly For A 3hp And Or 6hp Fairbanks Morse Z Igniter Style Engine. Check Out The Pictures And See If You Need It. I Am A Real Person Who Is Easy To Find. Mounts To The Engine With 2 Holes 2-14" Apart On Center.


$115.95

Rocker Arm And Mounting Bracket For 6hp Fairbanks Morse Z Spark Plug Gas Engine

Rocker Arm

Rocker Arm And Mounting Bracket For 6hp Fairbanks Morse Z Spark Plug Gas Engine For Sale Online

Here Is An Original And Hard To Find Rocker Arm And Mount For A 6hp Fairbanks Morse Z Spark Plug Style Engine. Check Out The Pictures And See If You Need It. For A 6hp Fm Z. The Rocker Is About 6-18" In Overall Length.


$115.95

Fairbanks Morse Z 2hp Antique Engine On Custom Cart Fully Restored

Fairbanks Morse

Fairbanks Morse Z 2hp Antique Engine On Custom Cart Fully Restored For Sale Online

This Type Of Engine Was Typically Used For Light Industrial And Farm Applications. It Was One Of The Most Common Types Of Stationary Engines In Use In The 1920s And 30s. This Particular Version Is A Throttle Governed Engine That Runs On Kerosene As Well As Gasoline.


$1195.00

Brand New Fairbanks Morse Z Hit And Miss Engine Brass Data Tag

Brand New

Brand New Fairbanks Morse Z Hit And Miss Engine Brass Data Tag For Sale Online

It Isetched And Hasdepth.


$129.00

6hp Fairbanks Morse Z Steel Crankguard Hit Miss Gas Engine Steam Tractor Oiler

6hp Fairbanks

6hp Fairbanks Morse Z Steel Crankguard Hit Miss Gas Engine Steam Tractor Oiler For Sale Online

This Is A Very Hard To Find Original Steel Crankguard Or Fender For A 6hp Fairbanks Morse Z Flywheel Type Gas Engine. It Is In Excellent Condition With No Cracks, Breaks, Or Repairs Of Any Kind As Can Be Seen.


$185.95

Cam Timing Gear Mounting Pin For 3 Hp Fairbanks Morse Z Hit Miss Gas Engine

Cam Timing

Cam Timing Gear Mounting Pin For 3 Hp Fairbanks Morse Z Hit Miss Gas Engine For Sale Online

Cam Gear For 3 Hp Fairbanks Morse Zhit Miss Gas Engine. 3 Hp Fairbanks Morse Z. Cam Gear In Good Condition And Ready To Use. I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable.


$119.99

Cam Gear And Mounting Bolt For Headless Fairbanks Morse Z Gas Hit Miss Engine

Cam Gear

Cam Gear And Mounting Bolt For Headless Fairbanks Morse Z Gas Hit Miss Engine For Sale Online

Here Is A Cam Gear And Mounting Bolt For A 1-12hp Fm Headless Gas Engine. Seems To Be In Great Shape And Ready To Use. Check Out The Pictures And See If You Need It. I Am A Real Person Who Is Easy To Find.


$125.95

Magneto Kit Fit Fairbanks Morse Fm J1a2 Z Hit Miss Engine 15 2 3 6 10 20 Hp Cf8

Magneto Kit

Magneto Kit Fit Fairbanks Morse Fm J1a2 Z Hit Miss Engine 15 2 3 6 10 20 Hp Cf8 For Sale Online

J1a2, Fm-j1a2a. And Other Engines When Fitted With Fairbanks Morse Magneto Numbers You Must Make Sure That Your Magneto Is The Fairbanks Morse Fm-j1a2 As These Engines Were Also Have Been Fitted With Other Magnetos Such As The Earlier Rv And Later Fm-x Series.


$159.86

6 Flat Belt Pulley For 1-12hp Fairbanks Morse Hit Miss Engine Fm Z

6 Flat

6 Flat Belt Pulley For 1-12hp Fairbanks Morse Hit Miss Engine Fm Z For Sale Online

Here Is A Very Nice Cast Iron Pulley For A 1-12hp Headless Fairbanks Morse Hit And Miss Engine. Check Out The Pictures And See If You Need It. For A 1-12hp Fm Z And A Fm Z Headless, Will Probably Fit Other Fm Engines.


$114.95

Fairbanks Morse Z Gas Engine Plug Oscillator Igniter 3-6 Hp Loose

Fairbanks Morse

Fairbanks Morse Z Gas Engine Plug Oscillator Igniter 3-6 Hp Loose For Sale Online

Fairbanks Morse Z Gas Engine Plug Oscillator Igniter 3-6 Hp Loose. Hey Good Loose Complete Bracket For I Believe A 3 To 6 Hp Fairbanks Antique Stationary Type Z Gas Engines. Igniter Has No Cracks Or Breaks Or Welds But Will Need Rebuilt And I Have Not Had It Tested But Looks In Good Condition. Please See Pictures For More Information And Condition. Sold As Is.


$105.00

Carburetor Fuel Mixer For 1-12hp Or 2hp Fairbanks Morse Throttler Z Engine Fm

Carburetor Fuel

Carburetor Fuel Mixer For 1-12hp Or 2hp Fairbanks Morse Throttler Z Engine Fm For Sale Online

Here Is A Carb Or Fuel Mixer For A 1-12hp Or 2hp Fairbanks Morse Z Throttle Governed Gas Engine. I Am Sure There Are Other Excuses Also But I Don't Care And Don't Want To Hear Them. So Here It Is.


$149.95

Governor Cam Bracket Assembly Fairbanks Morse Z 1-12hp To 2hp Gas Engine Fm

Governor Cam

Governor Cam Bracket Assembly Fairbanks Morse Z 1-12hp To 2hp Gas Engine Fm For Sale Online

Here Is An Original Cast Iron Cam And Governor Assembly Bracket For A 1-12hp Or 2hp Fairbanks Morse Z Throttle Governed Gas Engine. It Is Missing The The Governor And Governor Arm. What Is There Is In Great Shape Though.


$125.95

Cam Governor Bracket Assembly 1-12hp 2hp Fairbanks Morse Z Gas Engine Fm Ab33

Cam Governor

Cam Governor Bracket Assembly 1-12hp 2hp Fairbanks Morse Z Gas Engine Fm Ab33 For Sale Online

Here Is A Very Nice Complete Cam And Gov Assembly Bracket For A 1-12hp And Or A 2hp Fm Z Gas Engine. This Bracket Is Supposed To Be Used With An Ab33 Or Ab34 Magneto There Is Only Very Minimal Wear.


$249.95

6 Flat Belt Pulley For 1-12hp Headless Fairbanks Morse Hit Miss Engine Fm Z

6 Flat

6 Flat Belt Pulley For 1-12hp Headless Fairbanks Morse Hit Miss Engine Fm Z For Sale Online

Here Is A Very Nice Cast Iron Pulley For A 1-12hp Headless Fairbanks Morse Hit And Miss Engine. It's A Little Rusty But Should Clean Up Nicely. Check Out The Pictures And See If You Need It. For A 1-12hp Fm Headless, Will Probably Fit Other Fm Engines.


$114.95

Fairbanks Morse Z Engine Information

Fairbanks Morse Z Dishpan Engine Main Caps Gas Engine Motor Op8.3

In Good Condition.

6hp Fairbanks Morse Z Gas Engine Sumter Plugoscillator Steam Tractor Original

6hp Fairbanks Morse Z Throttle Governed, Open Crank, Flywheel Type Engine. It Is The Early Style With One-piece Hopper. Engine Is In Good Condition With No Cracks, Breaks, Or Repairs That I Can See Or Know Of But It Is Stuck.

1919 1-1/2hp Fm Crank Guard Fairbanks Morse Z Old Gas Engine. Here Is A Crank Guard For A 1919 1-12hp Fairbanks Morse Z Gas Engine. This Is For The Engine With The Flat Steel Push Rod And The Sumter Mag Setup On The Side Of The Head That Was Made Only In 1919.

Rebuilt Case 6 Cylinder 500e 930 940 Tractor 377 Engine Magneto Fairbanks Morse . Fairbanks Morse Model (z6b9 . Fits Case 377ci Engines, 500e, 940 Tractors. Hot Spark. Never Installed. Wide Add Mounting Plate 3.75". Mounting Plate Whole Center 4.75'. Height 6.5". ).

6 Hp Fairbanks Morse Z Hand Crank Handle Old Hit Miss Gas Engine Original

6 Hp Fairbanks Morse Z Hand Crank. I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable. Spring On The Catch A Little Loose, It Works But Could Stand To Be Replaced. I Apologize For Any Inconvenience.

Fairbanks Morse Z Ignitor Rocker Arm Hit Miss Stationary Engine 7-16-19. For Your Consideration Is What I Believe To Be An Original Fairbanks Morse Z Ignitor Or Plug Oscillator Engine Rocker Arm Its About 2-14 On Center Between The Center Of The Pivot And The Adjuster Bolt.

3 Hp Fairbanks Morse Z Intake Valve Throttle Gov Suction Carb Engine Motor . Intake Valve For The 3 Hp Fairbanks Z Throttle Governed With Fuel Pump Carb Engine.

Fairbanks & Morse Z Hit Miss Gas Engine Cast Iron Rocker Arm

The Mounting Stand Has Fm Part #zba41 Cast In It. Good Rocker Arm That Fits Engines That Use A 5 12" Long Rocker Arm. No Cracks Welds Or Repairs. See Photos!

Fairbanks Morse Type Z Engine Owners Operators Manual Parts Catalog. Contains 32 Pages Which Have Been Digitally Scanned And Reprinted From The Original Oem Manual. Covers Fairbanks Morse Type Z, 3 To 6 Hp (throttle Governed) With Spoked Fly Wheels .

Carburetor Fuel Mixer For 1-1/2hp Or 2hp Fairbanks Morse Throttler Z Engine Fm. Here Is A Carb Or Fuel Mixer For A 1-12hp Or 2hp Fairbanks Morse Z Throttle Governed Gas Engine. I Am Sure There Are Other Excuses Also But I Don't Care And Don't Want To Hear Them. So Here It Is.

Fairbanks-morse 3 & 6 Hp Z Hit-miss 1917 Engine Owners, Service & Parts Manual

(form No. 2417d (1917 ( 18 Pages). To Give You The Best Manual That Will Serve It's Purpose Of Clarity, Utility And Longevity. Printing In Full Color When Possible To Present The Full Aspect Of The Original Author. ).

Crank Bearing Caps And Inserts For 6 Hp Fairbanks Morse Z Hit Miss Gas Engine Fm. 6hp Fairbanks Morse z. Fits 6 Hp Fairbanks Z. I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable. Top And Bottom Inserts Included. 4" 2 Hole Mounting Center To Center.

Sumter 12 Magneto Headless Fairbanks Morse Z Ser No.121588 Gas Engine Not Hot!. Here Is A Sumter Model 12 Low Tension Magneto. Only Very Minimal Bearing Wear. This Mag Doesn't Have Any Spark. The Base Needs To Be Replaced But Those Are Easy To Get. This Mag Is Used On Headless Fairbanks Morse Engines And Possibly Others.

Fairbanks Morse Headless Z Carb Carburetor Hit Miss Gas Engine

Has Fuel Line. Valve & Needle Are Free.

Head For 3 Hp Fairbanks Morse Z Hit Miss Gas Engine Motor Old Fm #zba3. Head For 3hp Fairbanks Morse Z. Head Is Off A Running 3hp Fairbanks Morse Z. I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable. 1 12" Exhaust Threads. I Apologize For Any Inconvenience.

Crankguard 3hp Fairbanks Morse Z Hit Miss Gas Engine Crank Guard . Crankguard 3hp Fairbanks Morse Z Hit Miss Gas Engine Crank Guard. This Is The Version For Magneto Engine. Has Factory Cut-out For Magneto. Minor Surface Rust But Zero Dents.

Clamp And Studs Bosch Ab-33 Or Ab-34 For A Fairbanks Morse Z Gas Engine Fm. This Clamp And Studs Is Supposed To Be Used With An Ab33 Or Ab34 Magneto On A Fm Z Engine. Check Out The Pictures And See If You Need It. The Holes In The Clamp Are About 3-78" Apart. For A Fm Z Engine.

Fairbanks Morse Type Z Hit & Miss Engine Spoked Fly Wheels Service Repair Manual. Contains 23 Pages Which Have Been Digitally Scanned And Reprinted From The Original Oem Manual. .

I.d. Tag For Fairbanks Morse "208 Z" Hit Miss Engine Name Plate

This Is The I.d. Plate From A Fairbanks Morse "208 Z" Hit N Miss One Cylinder Engine.

Operators Manual For Fairbanks Fits Morse Engines Hit And Miss Engine (type Z). This Fairbanks Fits Morse Model Engines Hit An Miss Engine Operator's Manual (type Z, Model B) Is A Reproduction Of The Original Manufacturer-issued Owner's Manual. Hyster Forklift. Nissan Forklift. Farmall Tractor.

Head For A 3hp Fairbanks Morse Z Old Gas Engine Fm Spark Plug Motor Nice Zba3. Part No Zba3. Here Is An Original Head For A 3hp Fairbanks Morse Z Engine. The Valves Look And Feel Great But The Seat For The Exhaust Valve May Need Touched Up A Tiny Little Bit. Take A Look At The Pictures And See If You Should Have It.

Brass Tag Fairbanks Morse Z C 118 Hit Miss Engine Tractor Antique Name Plate Zc. Fairbanks Morse "zc 118". I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable. 3 58" Center To Center Mounting Pattern. I Apologize For Any Inconvenience. Conditiondue To Age This Item Is Being Sold "as Is".

Carburetor Fuel Mixer For 1-1/2hp Or 2hp Fairbanks Morse Throttler Z Engine Fm !. Here Is A Carb Or Fuel Mixer For A 1-12hp Or 2hp Fairbanks Morse Z Throttle Governed Gas Engine. I Am Sure There Are Other Excuses Also But I Don't Care And Don't Want To Hear Them. So Here It Is.

Carburetor W/ Fuel Pump 3 Hp Fairbanks Morse Z Throttle Gov Engine Hit Miss Gas

3 Hp Fairbanks Morse Z Throttle Governed Engine. Fits 3 Hp Fairbanks Morse Throttle Governed Engine. Carburetor With Built-in Fuel Pump For. I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable.

Crank Guard For A 1-1/2hp Headless Fairbanks Morse Z Hit And Miss Gas Engine Fm. Here Is A Very Nice Original Steel Crank Guard For A Headless Fairbanks Morse Z Engine. It Has Been Brazed Near The Mounting Area. That Repair Seems Nice And Strong. Check Out The Pictures And See If You Need It.

Fairbanks Morse Z Gas Engine Plug Oscillator Igniter 3-6 Hp Loose

Fairbanks Morse Z Gas Engine Plug Oscillator Igniter 3-6 Hp Loose. Hey Good Loose Complete Bracket For I Believe A 3 To 6 Hp Fairbanks Antique Stationary Type Z Gas Engines. Igniter Has No Cracks Or Breaks Or Welds But Will Need Rebuilt And I Have Not Had It Tested But Looks In Good Condition. Please See Pictures For More Information And Condition. Sold As Is.

Connecting Rod Cap For Large Fairbanks Morse Z Gas Engine 10hp Or Larger ??. Here Is An Original Connecting Rod Cap For A Large Fairbanks Morse Z. I Am Not Sure What Size Its For But I Am Sure It Is 10hp Or Bigger. Seems To Be In Great Shape. Check Out The Pictures And See If You Need It.

Crank Guard For 6hp Fairbanks Morse Z Throttle Gov Hit Miss Gas Engine Nice

Here Is An Original Steel Crank Guard For A 6hp Fairbanks Morse Z Gas Engine. Seems To Be In Great Shape And Has Original Paint. There Are A Very Few Holes That Have Been Drilled In Edge On Either Side.

3 Hp Fairbanks Morse Z Governor Assembly Hit Miss Gas Engine

For Ignitor Style Engine.

1 1/2 Hp Piston, Rod, Rod Cap For Fairbanks Morse "z" Hit Miss Gas Engine Fb Z. 1 12 Hp Piston, Rod, Rod Cap For Fairbanks Morse "z". 1 12 Hp Fairbanks Morse Z. Piston And Rod Are In Good Condition And Ready To Use. I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable.

Crank Bearing Caps And Inserts For 3 Hp Fairbanks Morse Z Hit Miss Gas Engine Fm

3hp Fairbanks Morse z. Fits 3 Hp Fairbanks Z. Top And Bottom Inserts Included - One Insert Has A Crack That Does Not Effect Use - See Photos. I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable.

Nice 3 Hp "z" Fairbanks Morse Hit Miss Gas Engine Crank Splash Guard Rare !!. This Is A Nice Original "crank Guard" Or "splash Guard" For The Fairbanks Morse Gasoline Engines. This Is For The 3 Hp "z" Engines. It's Ready To Use On Or Display With Your Engine. Don't Miss Out On Your Chance To Pick Up A Super Nice Original Crank Guard For Your 3 Hp Fairbanks Morse Gas Engine.

Original Name Tag Fairbanks Morse 2hp Z Old Gas Engine Fm 4" X 2-1/4" . Check Out The Pictures And See If You Need It. I Am A Real Person Who Is Easy To Find. Holgate Ohio 43527.

Fairbanks Morse Z Model B Engine Owners Operators Manual Hit & Miss . Contains 12 Pages Which Have Been Digitally Scanned And Reprinted From The Original Oem Manual. .

Old Fairbanks Morse 6hp Z Main Bearing Caps Hit Miss Gas Engine Zc12 Steam Nice!. They Are In Good Condition With No Cracks, Breaks, Or Repairs Of Any Kind. If You've Been Looking For One To Complete A Restoration Or To Replace Your Broken Or Repaired One Here's Your Chance. Good Luck.

Crank Guard For A 1-1/2hp To 2hp Fairbanks Morse Z Hit Miss Gas Engine Patina

For Your Consideration Is An Original Crank Guard For A 1-12hp To 2hp Fairbanks Morse Z Hit And Miss Stationary Gas Engine. It Is In Great Shape And Ready To Use. Check Out The Pictures And See If You Need It.

1 1/2 Or 2hp Fairbanks Morse Z R Mag Gear Shield Gas Engine Motor Op6.4. 1 12 Or 2 Hp Fairbanks Z R Mag Gear Shield.

Original Name Tag Fairbanks Morse 3hp Z Old Gas Engine Fm 4-1/2" X 2-5/8" !. Check Out The Pictures And See If You Need It. I Am A Real Person Who Is Easy To Find. Holgate Ohio 43527.

1 1/2 - 2hp Fairbanks Morse Z Dishpan Hand Crank Handle Hit Miss Gas Engine. 1 12 - 2hp Fairbanks Morse Z Dishpan Hand Crank. Crank Part No. I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable. Cast Iron In Nice O Riginal Condition. I Apologize For Any Inconvenience.

Rocker Arm And Stand 1-1/2hp Or 2hp Fairbanks Morse Z Old Gas Engine Fm. This Is An Original Cast Iron Part Is May Look A Little Like Aluminum In A Couple Pics But That Is Because I Used Sand Paper To Clean It In Order To Read The Part Number. Take A Look At The Pictures And Decide If You Need It.

3-1/2" Piston For 1-1/2hp To 2hp Fairbanks Morse Z Fm Old Gas Engine Part Zaa5b

Here Is A Piston For A 1-12hp To 2hp Fairbanks Morse Z Engine. It Is In Great Shape But Has A Little Surface Rust That Won't Hurt Anything. Check Out The Pictures And See If You Need It. The Center Of The Wrist Pin Is 2-116" From The Head Of The Piston.

1 1/2 Hp Fairbanks Morse Z Hand Crank Handle 1 3/8” Crankshaft Hit Miss Engine. Hand Crank For 1 12 Hp Fairbanks Morse Z. Fits On A 1 38" Crankshaft And Catches The Flywheel Key. I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable. Spring On The Catch Is Good.

Original Fairbanks Morse Z 6hp Gear Cover Gas Engine Motor Op3.4

Original Fairbanks Morse Z 6hp Gear Cover For Early Plug Oscillator. Cover In Good Condition.

Fm Sumter Plug Oscillator Magneto Igniter Bracket Fairbanks Morse Z Fm Engine

It Looks To Be In Good Shape And Should Ready To Use. It Has Been Repaired But The Repair Looks Good. Uses A Sumter Magneto, The Two Bolts For Mounting The Mag Are 2" Apart On Center. I Think It Only Fits A 3hp And A 6hp Fm Z Engine But It May Fit Larger Engines.

Fairbanks Morse Z C 1.5 Hp Gas Engine Motor Muffler Hit & Miss 1 Inch Npt. Will Fit Lots Of Other Engines As Well And Works Great On Many Models. A Really Nice Muffler And Super Nice Quality!

3 Hp Fairbanks Morse Model Z Starting Side Fuel Jet & Line Gas Engine Motor. New Fuel Jet And Line For The 3 Hp Fairbanks Z Engines On The Starting Side.

Fairbanks Morse Z Cam Gear Gas Engine Motor

Fairbanks Morse Z Cam Gear With Bolts. In Fair Condition.

3 - 6 Hp Fairbanks Morse Z Governor Bracket Cam Gear Throttle Engine Hit Miss . 3hp - 6hp Fairbanks Morse Z Throttle Governed Gas Engine. For Use On A 3-6 Hp Fairbanks Morse "z" Throttle Governed Engine. Governor Bracket Cam Gear For. Bracket And Gear Are In Good Condition And Ready To Use.

4" Bolt On Pulley For 1-1/2hp Or 2hp Fairbanks Morse Dishpan Z Engine Fm

Here Is An Original Pulley For A 1-12hp Or 2hp Fairbanks Morse Z Dishpan Flywheel Gas Engine. I Am Sure There Are Other Excuses Also But I Don't Care And Don't Want To Hear Them. So Here It Is. If You Decide You Don't Want It Or Find Another One Cheaper You I Won't Take It Back.

Fairbanks Morse Type Z Hit & Miss Engine Catalog

This Is A Reproduced Copy Of A Clean But Used Oem Brochure. Fairbanks Morse Catalog Dated 1919 - z + Equip All. Your Original Manuals Are Expensive, And Becoming Hard To Get. The Color Of Your Cover May Vary.

6 Hp Fairbanks Morse Model Z Run Side Fuel Jet & Line Gas Engine . New Fuel Jet And Line For The 6 Hp Fairbanks Z Engines On The Run Side.

1921 Fairbanks Morse & Co Chicago Illinois Z Engine Power On The Farm Farmer Ad

The-ad-store Is A Seller Of Original Vintage Magazine Advertisements Since 1999. All Ads Are Hand Selected, Graded And Professionally Packaged For Shipment. We Have A Huge Selection Of Vintage Magazine Ads, In Near Mint Condition And At Great Prices.

New 15 Hp Fairbanks Morse Model Z Intake Valve Gas Engine Motor.

Rocker Arm And Stand 1-1/2hp Or 2hp Fairbanks Morse Z Old Gas Engine Fm A+

Take A Look At The Pictures And Decide If You Need It. I Am Sure There Are Other Excuses Also But I Don't Care And Don't Want To Hear Them. Rocker Is About 4-38" Long. So Here It Is. If You Decide You Don't Want It Or Find Another One Cheaper You I Won't Take It Back.

Cam & Governor Bracket Assembly 1-1/2hp 2hp Fairbanks Morse Z Gas Engine Fm Ab33

Here Is A Very Nice Complete Cam And Gov Assembly Bracket For A 1-12hp And Or A 2hp Fm Z Gas Engine. This Bracket Is Supposed To Be Used With An Ab33 Or Ab34 Magneto There Is Only Very Minimal Wear.

6hp Fairbanks Morse Z Steel Crankguard Hit Miss Gas Engine Steam Tractor Oiler. This Is A Very Hard To Find Original Steel Crankguard Or Fender For A 6hp Fairbanks Morse Z Flywheel Type Gas Engine. It Is In Excellent Condition With No Cracks, Breaks, Or Repairs Of Any Kind As Can Be Seen.

Brass Tag 3 Hp Fairbanks Morse Z Hit Miss Engine Tractor Auto Antique Fm. 3 H.p. Fairbanks "z". I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable. 4 58" Center To Center Bolt Pattern. I Apologize For Any Inconvenience. Condition Good - Due To Age This Item Is Being Sold "as Is".

Fairbanks Morse Z 1-1/2 2hp Rocker Arm Stand Hit Miss Stationary Engine. For Your Consideration Is An Original Fairbanks Morse Z 1-12hp Or 2hp Rocker Arm & Stand. There Doesnt Appear To Be Any Cracks, Breaks Or Welds On The Stand, Or The Arm Itself. The Hole For The Stud Mount Is About A 12 Hole.

Sumter 14 Fairbanks Morse Headless Z Hit Miss Gas Engine Magneto Rebuilt Nice!

Very Hard To Find Sumter No.14 Rotary Magneto As Used On The Headless Fairbanks Morse Z Engines And A Few Others. Magneto Is In Excellent Rebuilt Condition And Has No Wear In The Bearings As It Has Been Bushed.

Old Fairbanks Morse 3hp Z Intake Valve Guard Hit Miss Engine Steam Magneto Oiler. This Is A Rather Hard To Find Original Intake Valve Guard For A Fairbanks Morse Z Engine. I Believe It Is For A 3hp Engine. It Is In Good Condition With No Cracks, Breaks, Or Repairs Of Any Kind. If You Need One For An Authentic Restoration Here's A Pretty Decent One.

1 1/2hp Fairbanks Morse Z Hit Miss Engine Cylinder Head W/valves Magneto Oiler

This Is An Original Cylinder Head With Valves For A 1 12 Or 2hp Fairbanks Morse Z Gas Engine. It Mounts With Four Holes On A 3 12" Square Pattern And Should Be Correct For The 1 12 And 2hp Head-type Engines Including The Dishpan Engines.

Hercules 6 Cylinder Gas Engine Tractor Rebuilt Magneto Fairbanks Morse Z6a14 . Hot Refurbished Magneto. Fairbanks Morse Model Z6a14. Fits Several Hercules 6 Cylinder Gas Engines. Hot Spark. Refurbished With Many New Parts. Tested On A Graham Lee Tester. Replaces The F6 Magneto.

Antique Vintage 3hp Fairbanks Morse Z Hit Miss Engine- Cam Gear And Mount Bolt. Gear Teath Look Good. Rust, Grease, Oil Due To Age.

Zb142 Magneto Gear 3hp Fairbanks Morse Z Igniter Style Sumter Mag Engine Fm

Here Is An Original Gear That Fits On A Low Tension Mag For A 3hp Fairbanks Morse Z Igniter Style Engine That Takes A Rotary Sumter Mag. This Gear May Also Have Other Applications. Take A Look At The Pictures And Decide If You Need It.

Stamped Steel Pulley For 1 1/2 Hp Fairbanks Morse Z Hit Miss Gas Engine

Pulley For 1 12 Fairbanks Z Hit Miss Engine. Holes Have Been Drilled Into The Face Of The Pulley - See Photos. I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable. Stamped Steel.

Original Fairbanks & Morse Z 1 1/2 Hp Hit Miss Gas Engine Cast Iron Hand Crank. Nice Original Hand Crank For Early Model Fm Z Engines. Has The Non Spinner Handle. Will Work On The Later Engines Also. T He Keyway Catch Is Good. No Cracks Welds Or Repairs. See Photos!

Original Fairbanks & Morse Z 3 Hp Hit Miss Gas Engine Cast Iron Hand Crank

Nice Original Hand Crank For Early Model Fm Z Engines. Has The Non Spinner Handle. Will Work On The Later Engines Also. The Keyway Catch Is Good And Has A Good Spring. It Has A Small Casting Flaw Hole On Back Side Does Not Affect It Working.

Cam Gear And Mounting Bolt For Headless Fairbanks Morse Z Gas Hit Miss Engine. Here Is A Cam Gear And Mounting Bolt For A 1-12hp Fm Headless Gas Engine. Seems To Be In Great Shape And Ready To Use. Check Out The Pictures And See If You Need It. I Am A Real Person Who Is Easy To Find.

Rocker Arm And Pin For 1 1/2 Hp Fairbanks Morse Z Hit Miss Gas Engine Fm "z". Rocker Arm And Pin For 1 2hp Fairbanks Morse Z. Hit Miss Gas Engine. I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable. Arm Is 4 38" Long. I Apologize For Any Inconvenience.

Rocker Arm And Stand For 1 1/2 Hp Fairbanks Morse Z Hit Miss Gas Engine Fm "z". Rocker Arm And Stand For Fairbanks Morse Z. Fits 1 12 Hp Fairbanks Morse Z. Rocker Arm And Stand Is In Good Condition And Ready To Use. Hit Miss Gas Engine. I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable.

Fairbanks Morse Z 3 Hp 475 Rpm Stationary Engine Brass Plaque Machine Badge

This Is An Antique Brass Plaque Fairbanks Morse Z 3 H.p. 475 R.p.m. - That I Believe Was Originally Attached To A Stationary Engine.

6" Flat Belt Pulley For 1-1/2hp Headless Fairbanks Morse Hit Miss Engine Fm Z. Here Is A Very Nice Cast Iron Pulley For A 1-12hp Headless Fairbanks Morse Hit And Miss Engine. It's A Little Rusty But Should Clean Up Nicely. Check Out The Pictures And See If You Need It. For A 1-12hp Fm Headless, Will Probably Fit Other Fm Engines.

6 Hp Brass Tag For Fairbanks Morse "z” Hit Miss Engine Tractor Auto Antique Fm Z. 6 Hp Fairbanks "z". I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable. 4 58" Center To Center Mounting Pattern. I Apologize For Any Inconvenience. 5" L X 3" W. Condition Good - Due To Age This Item Is Being Sold "as Is".

New Fairbanks Fits Morse Type Z (hit And Miss)(spoked Fly Wheels) Service Manual

Fairbanks Fits Morse Type Z (hit And Miss)(spoked Fly Wheels) Service Manual - 24 Pages. Toyota Fork Lift. 20 Yellow Fuel Gas Can Jug Vent Cap Rotopax Gott Rubbermaid Chilton Brigg Anchor (# 232854523484 ).

Old Fairbanks Morse Headless Z Governor Weight Hit Miss Gas Engine Steam Oiler. This Is An Original Governor Weight For A Headless Fairbanks Morse Z Hit And Miss Gas Engine. It Is In Good Used Condition With No Cracks, Breaks Or Repairs Of Any Kind. It Is Ready To Be Used On An Engine Or Put In Your Parts Inventory.

Set Original Head Bolt Nuts For 6 Hp Fairbanks Morse Z Hit Miss Gas Engine

6hp Fairbanks Morse Zhit Miss Gas Engine. Fits 6 Hp Fairbanks Morse Z. Set Of 4 Head Bolt Nuts For. I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable. I Apologize For Any Inconvenience.

Tag For Fairbanks Morse Z 118 Hit Miss Engine Name Plate. Fairbanks Morse Z 118. I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable. I Apologize For Any Inconvenience. Conditiondue To Age This Item Is Being Sold "as Is". All The Images Are Original Scans Of The Actual Item Being Sold.

Brass Tag For 2 Hp Fairbanks Morse Z Hit Miss Engine Tractor Auto Antique

2 Hp Fairbanks "z". I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable. 3 58" Center To Center Mounting Pattern. I Apologize For Any Inconvenience. Condition Due To Age This Item Is Being Sold "as Is".

American Bosch Ab33 Ab34 Magneto Clamp Bar Hold Down Fairbanks Morse Z Engine

It Is In Excellent Condition With No Cracks, Breaks, Or Repairs O Any Kind And Is Ready To Be Used On An Engine. These Magneto Hold Downs Are Pretty Tough To Find So If You Need One Don't Miss Out On This One.

Old Fairbanks Morse 3hp Z Cam Magneto Gear Guard Hit Miss Gas Engine Steam Nice!. This Is A Real Nice Original Gear Guard For Over The Gears On An Early 3hp Fairbanks Morse Z Gas Engine With Rotary Magneto. It Is In Excellent Condition With No Cracks, Breaks, Or Repairs Of Any Kind.

3hp Or 6hp Fairbanks Morse Z Carburetor Or Fuel Mixer Fm Gas Engine Carby. Here Is An Original Carb Or Fuel Mixer That Will Fit A 3hp Or 6hp Fairbanks Morse Z Spark Plug Style Engine. Its In Decent Shape But Not Perfect. The Compensator Disc Is Stuck But I Think It Would Loosen Up.

3hp Fairbanks Morse Z Hit Miss Engine Cylinder Head W/valves Magneto Oiler Nice!. This Is An Original Cylinder Head With Valves For A 3hp Fairbanks Morse Z Gas Engine. It Mounts With Four Holes On A 4 14" Square Pattern And Is Correct For The Spark Plug Fired 3hp Engines. It Is In Good Condition With No Cracks, Breaks, Or Repairs That I Can See Or Know Of.

1930 Fairbanks Morse Home Water Systems Dealer Catalog Binder Z Engine Typhoon . Fairbanks Morse Engine Driven Type b Water Systems. The Binder Is Fully Complete And Well Intact. Z Engine Driven Complete Typhoon Water Systems. Z Engine Driven Water Systems For Shallow Wells. Z Engine Driven Water Systems For Deep Wells.

3 Hp Fairbanks Morse Model Z Rod Bearing Gas Engine Motor. Fits Both The Igniter And Spark Plug Fired Engines.

Early Fairbanks Morse Z Plug Oscillator Hit Miss Gas Engine Splash Guard Rare !!. This Is A Nice Original "crank Guard" Or "splash Guard" For The Fairbanks Morse Gasoline Engines. I Think This Is For The Early Plug Oscillator 1-12 Hp Fairbanks Engines. Be Best For An Engine That Needs A Painted Guard, Other Wise It's Ready To Use Or Display With Your Engine. Don't Miss Out On Your Chance To Pick Up A Nice Original Crank Guard For Your Fairbanks Morse Gas Engine.

Brand New Fairbanks Morse Z Hit And Miss Engine Brass Data Tag. It Isetched And Hasdepth.

Carburetor 1 1/2 Hp Fairbanks Morse Z Dishpan Flywheel Hit Miss Gas Engine Fuel. 1 12 Hp Fairbanks Morse "z" Dishpan Flywheel Brass Carburetor. I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable. Fuel Pickup Tube (slightly Bent) - See Photos. I Apologize For Any Inconvenience.

Rocker Arm And Stand 1-1/2hp Or 2hp Fairbanks Morse Z Old Gas Engine Fm !!. Take A Look At The Pictures And Decide If You Need It. I Am Sure There Are Other Excuses Also But I Don't Care And Don't Want To Hear Them. So Here It Is. If You Decide You Don't Want It Or Find Another One Cheaper You I Won't Take It Back.

Rocker Arm & Stand For 6hp Fairbanks Morse Z Hit Miss Gas Engine Part# Zca39

Part# Zca39. Rocker Arm And Stand For 6hp Fairbanks Morse Z. Fits 6hp Fairbanks Morse Z. Rocker Arm And Stand Are In Good Condition And Ready To Use. Hit Miss Gas Engine. I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable.

Fairbanks-morse Z Farm Engines 12" X 16" Metal Sign. Fairbanks-morse Z Farm Engines 12" X 16" Reproduction Aluminum Sign. This Sign Is Baked On Gloss Finish Sign. Not A Vinyl Sign.

Governor Assembly For 3hp Or 6hp Fairbanks Morse Z Igniter Style Engine Old Fm

Here Is A Very Nice Governor Assembly For A 3hp And Or 6hp Fairbanks Morse Z Igniter Style Engine. Check Out The Pictures And See If You Need It. I Am A Real Person Who Is Easy To Find. Mounts To The Engine With 2 Holes 2-14" Apart On Center.

1.5 - 2 Hp Fairbanks Morse Model Z Exhaust Valve Gas Engine Motor

Exhaust Valve Fits The Dishpan Or Spoke Flywheel, Throttle Governed Or Hit & Miss 1.5-2 Hp Fairbanks Z.

3 Hp Fairbanks Morse Z Cam Gear Early Plug Ossilator Ignitor Gas Engine Motor . Cam Gear For The Early Plug Ossilator Or Ignitor 3 Hp Fairbanks Z Engine.

Rocker Arm & Stand For 6 Hp Fairbanks Morse "z" Hit Miss Gas Engine Motor Fb Z. Rocker Arm For 6 Hp Fairbanks "z". Fits 6hp Fairbanks "z". Rocker Arm And Bolt Are In Good Condition And Ready To Use. Rocker Arm Part # Zca29. I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable.

Fairbanks Morse Dishpan Z Rocker Assembly Hit Miss Stationary Engine. For Your Consideration Is An Original Fairbanks Morse Dishpan Z Rocker Arm, Stand And Spring Assembly. This Should Fit The 1-12 And 2hp Model Engines. It Is 4-14 Tip To Tip. Its Painted Green.

Brass Tag For Fairbanks Morse Z 118 Hit Miss Engine Tractor Antique Name Plate. Fairbanks Morse Z 118. I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable. 3 58" Center To Center Mounting Pattern. I Apologize For Any Inconvenience. Conditiondue To Age This Item Is Being Sold "as Is".

Carburetor Or Fuel Mixer For 6hp Igniter Style Fairbanks Morse Z Fm Engine

Here Is An Original Carb With Built In Fuel Pump For A 6hp Fairbanks Morse Z Igniter Style Gas Engine. It Looks To Be In Good Shape. It Is Missing A Small Brass Tube That Should Extend A Little Bit Into The Head Of The Engine, I Think It Would Be Super Easy To Replace That Tube Or It May Work Fine Without It.

Original Name Tag Fairbanks Morse 6hp Z Hit Miss Old Gas Engine Fm . Check Out The Pictures And See If You Need It. I Am A Real Person Who Is Easy To Find. Mounting Holes Are 4-58" Apart On Center.

3 Hp Fairbanks Morse Z Head Gasket Spark Plug Ignitor Gas Engine Open Crankcase. Made In The Usa!

Crankshaft Crank Shaft For 6 Hp Fairbanks Morse Z Hit Miss Gas Engine "z"

Crankshaft For 6 Hp Fairbanks Morse Z. Crankshaft Is In Good Original Condition. I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable. I Apologize For Any Inconvenience.

6 Hp Fairbanks Morse Model Z Rod Bearing Gas Engine Motor.

1919 1-1/2hp Fm Head Fairbanks Morse Z Old Gas Engine. Here Is A Head For A 1919 1-12hp Fairbanks Morse Z Gas Engine. This Is For The Engine With The Flat Steel Push Rod And The Sumter Mag Setup On The Side Of The Head That Was Made Only In 1919. It Has A Few Tight Cracks That Have Never Been Repaired.

Dj142 Magneto Gear 1-1/2hp Headless Fairbanks Morse Z For Sumter Engine Fm A+. Here Is An Original Gear That Fits On A Low Tension Mag For A 1-12hp Headless Fairbanks Morse Z Engine. This Gear May Also Have Other Applications. Take A Look At The Pictures And Decide If You Need It.

Throttle Assembly For 1-1/2hp Or 2hp Fairbanks Morse Z Old Engine Fm

Here Is A Throttle Assembly For A 1-12hp Or 2hp Fairbanks Morse Z Throttle Governed Gas Engine. Seems To Be In Great Shape And Ready To Use. I Am Sure There Are Other Excuses Also But I Don't Care And Don't Want To Hear Them.

303k161 Webster Magneto Igniter Bracket For Goold Or Fairbanks Morse Z Engine . Here Is A Webster Igniter Bracket For Goold Engine. It Is In Pretty Good Shape. I Am Pretty Sure This Will Also Fit A Fairbanks Morse Z Engine That Would Take A Plug Igniter. Check Out The Pictures And See If You Need It.

Brass Tag For Fairbanks Morse Z Hit Miss Engine Tractor Antique Name Plate

I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable. 4 58" Center To Center Mounting Pattern. I Apologize For Any Inconvenience. Condition Good - Due To Age This Item Is Being Sold "as Is".

Original Name Tag Candian Fairbanks Morse 1-1/2hp Z Hit Miss Gas Engine Fm

Check Out The Pictures And See If You Need It. I Am A Real Person Who Is Easy To Find. Mounting Holes Are 3-2132" Apart On Center.

Fairbanks Morse Z 1.5 Hp Fuel Jet Needle Primer Tank Gas Engine Motor Throttle

This Is For A Throttle Governed Engine. If Your Carb Looks Like The One In The Picture Then This Is For You!carb Not Included!

3 Hp Fairbanks Morse Z Gasket Set Gas Engine Motor Hit & Miss Head Carb . Head Gasket, Carb, And Air Plate Gasket Is In This Set. We Own All The Tooling And Settle For Only The Best Money Can Buy.

1 1/2 Hp Fairbanks Morse Z Piston Ring Set 3.5 X 1/8 Gas Motor Hit Miss Engine



Piston Connecting Rod Cap For 1 1/2hp Fairbanks Morse Z Hit Miss Gas Engine Fm

Piston, Conecting Rod & Cap For1 12hp Fairbanks Morse Z. Fits 1 12 Hp Fairbanks Morse Z. Connecting Rod Part No. I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable. I Apologize For Any Inconvenience.

10" Bolt On Pulley For Fairbanks Morse Z, T, Or H Old Hit Miss Gas Engine Nice. I Am Pretty Sure This Is An Original Bolt On Pulley For A Fairbanks Morse Z, T, And Or H Gas Engine. It Will Fit On A Variety Of Fm Engines But I Took It Off A 3hp T. I Am A Real Person Who Is Easy To Find.

Fairbanks Morse Z Headless Cam Gear Hit Miss Stationary Engine 11-17-19

For Your Consideration Is An Original Fairbanks Morse Z Headless Cam Gear For A Hit Miss Stationary Engine.

Fm Sumter Plug Oscillator Magneto Igniter Bracket Fairbanks Morse Z Gas Engine. It Looks To Be In Good Shape And Should Ready To Use. It Has Been Repaired But The Repair Looks Good. Uses A Sumter Magneto, The Two Bolts For Mounting The Mag Are 2" Apart On Center. I Am Sure There Are Other Excuses Also But I Don't Care And Don't Want To Hear Them.

1919 Fairbanks-morse Z Engines Catalog – Reprint In Full Color

H245 Fairbanks-morse z Farm Engines, Originally Published By Fairbanks-morse Co., Chicago, Illinois, 1919. 6 X 9 Paperback, 16 Pages. Only The Front Cover Shows An Engine In Color. All The Inside Pages Have Red Title Lettering, And Green Borders Around Various Pictures Of z Engines.

Brass Tag 1 1/2 Hp Fairbanks Morse Z Hit Miss Engine Tractor Antique Fm. 1 12 Hp Fairbanks "z". I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable. 4-58 Apart On Center 2 Hole Mounting. I Apologize For Any Inconvenience. Condition Good - Due To Age This Item Is Being Sold "as Is".

Set Original Head Bolt Nuts For 3 Hp Fairbanks Morse Z Hit Miss Gas Engine. 3hp Fairbanks Morse Zhit Miss Gas Engine. Fits 3hp Fairbanks Morse Z. Set Of 4 Head Bolt Nuts For. I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable. I Apologize For Any Inconvenience.

6 Hp Fairbanks Morse Z Exhaust Valve Ignitor Gas Engine Motor



Early Fairbanks Morse Z Hit Miss Gas Engine Sumter Oscillator Magneto Igniter . This Is An Igniter For The Earlier Fairbanks Morse Gasoline Engines. This Works On The 1 12 3 & 6 Hp Engines.

Rocker Arm And Stand 1-1/2hp Or 2hp Fairbanks Morse Z Old Gas Engine Fm !!

Take A Look At The Pictures And Decide If You Need It. I Am Sure There Are Other Excuses Also But I Don't Care And Don't Want To Hear Them. Rocker Is About 4-38" Long. So Here It Is. If You Decide You Don't Want It Or Find Another One Cheaper You I Won't Take It Back.

Governor Cam Bracket Assembly Fairbanks Morse Z 1-1/2hp To 2hp Gas Engine Fm

Here Is An Original Cast Iron Cam And Governor Assembly Bracket For A 1-12hp Or 2hp Fairbanks Morse Z Throttle Governed Gas Engine. It Is Missing The The Governor And Governor Arm. What Is There Is In Great Shape Though.

Nice Brass Tag Name Plate 3hp Fairbanks Morse Z Hit Miss Engine Tractor Antique

3hp Fairbanks Morse Z. I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable. 4 18" Center To Center Bolt Pattern. I Apologize For Any Inconvenience. Condition Good - Due To Age This Item Is Being Sold "as Is".

3 6 Hp Fairbanks Morse Z Water Injector Needle Gas Engine Motor

3 & 6 Hp Fairbanks Morse Z Water Injector Needle.

Old Fairbanks Morse Headless Z Fuel Mixer Intake Valve Cage Hit Miss Gas Engine. This Is An Original Fuel Mixer And Intake Valve Assembly For A Headless Fairbanks Morse Z Hit And Miss Gas Engine. It Is In Good Used Condition With No Cracks, Breaks, Or Repairs And The Fuel Needle Moves As It Should.

Fairbanks Morse 20hp Z Hit Miss Gas Engine Type R J Magneto Gear 22 Teeth Steam. Here Is An Original Magneto Gear For A Fairbanks Morse 20hp Z Gas Engine. It Has A Tapered Hole For The Magneto Armature Shaft. I Believe This Gear Is For The Type R And J Magnetos Used On Bigger (20hp) Z Engines.

Fairbanks Morse Z 1-1/2 2hp Rocker Arm Stand Hit Miss Stationary Engine Damaged. For Your Consideration Is An Original Fairbanks Morse Z 1-12hp Or 2hp Rocker Arm & Stand. There Doesnt Appear To Be Any Cracks, Breaks Or Welds On The Stand, But The Arm Itself, The Tip Is Missing.

Rocker Arm & Stand 1 1/2 Hp Fairbanks Morse "z" Hit Miss Gas Engine Motor Fb Z

Rocker Arm For 1 12 Hp Fairbanks "z". Fits 1 12hp Fairbanks "z". Rocker Arm And Bolt Are In Good Condition And Ready To Use. I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable.

Old Fairbanks Morse Headless Z Main Bearing Caps Hit Miss Gas Engine Steam Nice!

They Are In Good Condition With No Cracks, Breaks, Or Repairs Of Any Kind. If You've Been Looking For One To Complete A Restoration Or To Replace Your Broken Or Repaired One Here's Your Chance. Good Luck.

Rocker Arm Pin Fairbanks Morse Z Dishpan For Hit Miss Gas Engine. I Took This Off Of A 1 12 Hp Farbanks Morse Z Dishpan. Fairbanks Morse. Rocker Arm Pin Is In Good Condition And Ready To Use. No Breaks, Crack, Or Welds. Was On A Running Engine. If You Decide You Don't Want It Or Find Another One Cheaper, I Won't Take It Back.

6" Flat Belt Pulley For 1-1/2hp Fairbanks Morse Hit Miss Engine Fm Z !!

Here Is A Very Nice Cast Iron Pulley For A 1-12hp Headless Fairbanks Morse Hit And Miss Engine. Check Out The Pictures And See If You Need It. For A 1-12hp Fm Z And A Fm Z Headless, Will Probably Fit Other Fm Engines.

Pair Of Fairbanks Morse Z Headless Main Bearing Caps Gas Engine Motor Op26.2

In Great Condition.

Fairbanks Morse Z 1-1/2 To 2hp Rocker Arm Hit Miss Stationary Engine

For Your Consideration Is An Original Fairbanks Morse Z 1-12 To 2hp Rocker Arm & Stand. Its About 4-38 Overall, The Mounting Stud Hole Is 12. It Doesnt Appear To Have Any Cracks Breaks Or Welds.

Brass Tag W/ Hopper Splash Guard 3 Hp Fairbanks Morse Z Hit Miss Engine

3 Hp Fairbanks Z. 3 Hp Fairbanks-morse Z Hit Miss Engine. I Have Been Collecting Hit Miss Engines For 35+ Years And I Am Very Knowledgeable. If You Decide You Don't Want It Or Find Another One Cheaper, I Won't Take It Back.

6 Hp Fairbanks Morse Model Z Starting Side Fuel Jet & Line Gas Engine Motor. New Fuel Jet And Line For The 6 Hp Fairbanks Z Engines On The Starting Side.